Dependence of electrical resistance of polypropylene–mineral filler composites on temperature and ionizing radiation
Abstract
The article studies the changes in the electrical properties of composite materials based on polypropylene (PP) modified with varying amounts of α-Al₂O₃ and mica under the influence of temperature and ionizing radiation. In the studies, along with the original polypropylene, composites containing 20 and 40 wt.% α-Al₂O₃, as well as 20 and 40 wt.% mica, were compared. The temperature dependence of the specific resistance was investigated in the temperature range of 298÷480 K in the coordinates lgρ=f(T), and the changes in the electrical resistance after irradiation of the samples at doses of 50 kGy and 80 kGy were analyzed. It was found that in all the studied samples, an increase in temperature is accompanied by a decrease in specific resistance. This behavior is associated with the thermal activation of charge carriers in the polymer matrix and the strengthening of the temperature dependence of electrical conductivity. The inclusion of mineral fillers significantly increases the sensitivity of the electrical resistance of composites to temperature changes. In particular, in samples modified with mica, a more intensive decrease in resistivity is observed as the temperature increases. Increasing the radiation dose causes additional changes in the electrical properties of the composites, which can be explained by radiation-induced structural changes and the formation of local energy levels at the polymer-filler interface.
Keywords
polypropylene, α-Al₂O₃, mica, polymer composite, resistivity, electrical conductivity, temperature dependence, ionizing radiation, radiation modification